I have a desktop and a netbook and I'm trying to bridge the connection from the netbook to the desktop via Ethernet, the netbook is connected to the Internet via wifiI have tried changing IP addresses on both machines and tried doing all that fun stuff with command prompt (ipconig /all, etc) and still, no luckI've even enabled ICMP and DHCP on one machine, both machines, and vice versaAlso, when the bridge is disconnected but both machines are connected via Ethernet I get the quot;limited or no connectionquot; popup on the connection on both machinesDoes anyone know how to fix this issue?
Yes you canIt does the same purpose by protecting your hair from heatYou can try get something else if you think it won't protect your hairI suggest Dove or Tresemme products.
I used to put it on mine before blow dryingThen when its dry go over it with flat iron works really well with the serum silk infusion by chihope that helps.
The Chi 40 4 Iron guard isn't properly worth your fundsI even have it, it smells like cologne in the commencing upand that i've got tried 2 bottles of it, yet as quickly as I spray it on it made my hair experience annoying -_- like hair sprayso I had to sweep it out andyeah, i like Tresemme far extra appropriateand this is basically $4Goodluck! and sorry, i did no longer try the different product:)
Assuming that the laptop is running a version of Windows (XP or later), and the laptop is accessing the Internet successfully through its WiFi adapter, then the first thing you have to check is that the laptop WiFi adapter is not using the sub-net 192.168.0.-If it is using this sub-net, then your router will have an address of 192.168.0.n (where n is 1 to 254), and you will have to change the address of the router to use a different sub-netChange the third number to a different one between 1 and 255For example, if the router is on address 192.168.0.1, change it to 192.168.1.1Next, in the properties for the WiFi adapter, go into the advanced tab and there should be a tick box for Internet Connection Sharing (ICS)Put a tick in the box and click OK(Note: the ICS tick box will not appear if there is only one network adapter [your laptop has WiFi and Ethernet, so this should not be a problem]Also, it will not appear if it has been selected on another adapter.) The Ethernet adapter on the laptop should automatically have been set to address 192.168.0.1The gateway and DNS addresses will be blank on this interfaceThat is fineAll that you should need to do is use a cross-over Ethernet cable to connect the laptop to the desktopBoot the desktop after the laptop has bootedRun IPCONFIG /ALL on the desktopThe desktop should have picked up the following addresses automatically: IP address: 192.168.0.n (n 2 to 254) Gateway address: 192.168.0.1 DNS server address: 192.168.0.1 If you want you could set manual addresses on the desktopThe IP address should be in the range 192.168.0.2 to 192.168.0.254The gateway should be 192.168.0.1 and the DNS server can be the same as the gateway; or it can be the address of your router; or it could be an external DNS server such as 8.8.8.8 (a Google DNS server).
Yes you canIt does the same purpose by protecting your hair from heatYou can try get something else if you think it won't protect your hairI suggest Dove or Tresemme products.
I used to put it on mine before blow dryingThen when its dry go over it with flat iron works really well with the serum silk infusion by chihope that helps.
The Chi 40 4 Iron guard isn't properly worth your fundsI even have it, it smells like cologne in the commencing upand that i've got tried 2 bottles of it, yet as quickly as I spray it on it made my hair experience annoying -_- like hair sprayso I had to sweep it out andyeah, i like Tresemme far extra appropriateand this is basically $4Goodluck! and sorry, i did no longer try the different product:)
Assuming that the laptop is running a version of Windows (XP or later), and the laptop is accessing the Internet successfully through its WiFi adapter, then the first thing you have to check is that the laptop WiFi adapter is not using the sub-net 192.168.0.-If it is using this sub-net, then your router will have an address of 192.168.0.n (where n is 1 to 254), and you will have to change the address of the router to use a different sub-netChange the third number to a different one between 1 and 255For example, if the router is on address 192.168.0.1, change it to 192.168.1.1Next, in the properties for the WiFi adapter, go into the advanced tab and there should be a tick box for Internet Connection Sharing (ICS)Put a tick in the box and click OK(Note: the ICS tick box will not appear if there is only one network adapter [your laptop has WiFi and Ethernet, so this should not be a problem]Also, it will not appear if it has been selected on another adapter.) The Ethernet adapter on the laptop should automatically have been set to address 192.168.0.1The gateway and DNS addresses will be blank on this interfaceThat is fineAll that you should need to do is use a cross-over Ethernet cable to connect the laptop to the desktopBoot the desktop after the laptop has bootedRun IPCONFIG /ALL on the desktopThe desktop should have picked up the following addresses automatically: IP address: 192.168.0.n (n 2 to 254) Gateway address: 192.168.0.1 DNS server address: 192.168.0.1 If you want you could set manual addresses on the desktopThe IP address should be in the range 192.168.0.2 to 192.168.0.254The gateway should be 192.168.0.1 and the DNS server can be the same as the gateway; or it can be the address of your router; or it could be an external DNS server such as 8.8.8.8 (a Google DNS server).
