I need to know how to change my front wheel bearings on my 1996 honda passport 4 wheel drive
The bearings are pressed into the uprights, so you need to take the front upright off the vehicle, press the old bearings (2) out and press two new ones in and reassemble.
A 1994 honda has a press in style bearing you will need a press or you can take off the steering knuckle and take it to a good automotive machine shop and they can press them in for you .
To replace the bearings themselves, you’ll simply follow all of the same steps listed in the article, but also (A) remove the races from the hubs, (B) install a new set of races – which is best accomplished by using a very large socket that is the same diameter as the flat outer ring-edge surface of the race, and hammer them in until you hear the tone of the ringing sound change, which indicates that they have seated – and (C) install the new bearings…
Disconnect the caliber,pull off the rotor,remove the axle nut,remove the bearing assemble bolts(3or4bolts)hammer off the old bearing assemble,the lug nut studs are part off the bearing hub.Reverse the process for the new one
