How does a concrete mixer operate
Steps and considerations for concrete mixers: Steps: 1, switch the function switch from the column to "automatic" position, press the start switch on the controller, and the whole operation will operate automatically. After the whole process is finished, it will stop automatically, and in the running project, if it is necessary to stop, press the stop button and then restart. After the start button is pressed, the display begins to show time, slow, sand, fast, stop, fast, and run the light on time. When automatic control, all the switches must be allocated to the stop position.
If the machine is relatively new, the button will have, it's going to go up, go down, automatically add water, add water by hand, mix it up, mix it up, stop, vibrate
Before the concrete mixer starts, check the controllers for good. 2, the concrete mixer must clean the inside when used, especially in the winter, no foreign material in the front roller should be used, thus extending the service life. The concrete mixer should be placed in a firm place, and shall be secured with the support of the scaffold or the support of the shaft, and shall not be supported by the tyre. When the concrete mixer is in operation, it is strictly forbidden to put the tools in the roller, and pay more attention to safety. 5, concrete mixer in the feed hopper rises, for the sake of safety, personnel are strictly prohibited by or stay under the hopper, after the completion of the work of the mixer hopper fixed; When the concrete mixer is on site, it should be fixed in the mixer, cut off the power supply, and get into the mixer cylinder In custody
