How does the forklift start?
Why is the front wheel of the forklift narrow.I hope my answer will help you.
Some have ignition locks, others open the keys, have a start button and hold it up.
Start the engine Step 1: step on the clutch pedal, start the engine, gradually increase the temperature of the engine, adjust the multi-way valve properly, and lift the fork lift off the ground about 15-20cm. (1) will shift in the middle (gap), hand brake in the braking state, insert the starting switch key and turn clockwise to "warm up" position, for 5 seconds, and then go to "start" position, at the same time gently on the accelerator pedal, and tread down the clutch pedal, starting time shall not exceed 10 seconds, once starting immediately after let go, the key to automatic reset, if the engine won't start, should lie between 1 to 2 minutes, starting again.
