How does the shuttleless belt adjust the belt?
5. Bottom line crochet should not be removed when the bottom line crochet, the bottom line cam spring, cam roller fixtures, etc., to reduce wear and tear.
The 4. According to the actual position of the reed and the actual position of the fabric, adjust the needle back and forth position, so that meet the crochet latitude requirements, adjust the needle bar to prevent the needle when the crochet tongue closed, and can not hook the weft
3. With the Allen wrench, unscrew the hexagonal screws on the aluminum arm of the knitting needle, adjust the needle angle, loosen the needle arm fastening screw, move the needle arm up and down, adjust the upper and lower position of the crochet, observe the needle angle and Crochet high and low position, so that the crochet in line with the requirements of the hook
2. Adjust the stroke of the needle by the scale indicated on the dial. There are four screw holes on the pivot axis, which are different from the axis position and the eccentricity is different. If you want to be more accurate need to spin the inside of the knitting needle on the inside of the flat head of the hexagonal screws, rotating the pivot, so that the knitting needle stroke to meet the fabric measurement, adjust the crochet link and joystick connection position, so that the needle needle needle size
Crochet needle installation and commissioning: 1. Twist loose needle fixed pressure plate, the knitting needle according to a certain tilt angle (about 20 degrees) fixed on the knitting needle seat, the debugging process to always ensure that the crochet can match the weft needle latitude, off The weft is slightly aligned with the needle plate
