How is the indoor installation of the LED panel lamp convenient?!
1, hanging: first in the LED panel lights back mounted on the suspension member, then connect the lanyard on it. Consumers must pay attention to ask, understand clearly hanging components is the manufacturer's standard parts or buy parts?.2, suction top type: first in the ceiling to play a few holes, and then LED panel light slide into the suction ceiling frame installed on the ceiling, fixed three sides. Then slide the panel light into it, and then screw the frame around the fourth edge. Convenient, simple and time-saving.3, embedded type: the first sheet metal groove is arranged on the ceiling, and then the bracket is fixed at the back of LED panel light pieces protruding outward, and then into the panel light, the sheet metal bracket and the ceiling of the anastomotic groove can be fixed on the ceiling. But because of the different thickness of the ceiling, it is necessary to adjust the height between the lamp face and the bracket, otherwise it will cause the LED panel lamp to be higher or lower than the ceiling surface. In general, suspension mounted LED panel lights are best for aquarium lighting, while ceiling mounted is the most common and easiest way to do so.
Aug 15, 2017
The main installation methods of LED panel lights are as follows:Circlip typeSuction ceiling typeEmbedded systemSuspendingReverse button typeSpecifically, your panel lights are suitable for those vendors who want to consult your suppliers. Take the 600x600mm LED panel lamp as an example. The installation drawings are as follows
Aug 15, 2017