How many main keels are a square gypsum board ceiling? How many vice keel? How many main keels are a square 600 aluminum slab plate ceiling? How many vice keel and corners?
Is the size of these things are calculated by size, such as the length is 2.4X1.5 this size, then the keel to four keel that is a square with a keel, vice keel a square to three corners One is three meters, if in accordance with the size of the words is to three corners, angle calculation method is calculated by the circumference
(2.4 + 1.5) X2 / 3 = 2.6 is the root of the three, if not connected, then it is calculated by this 2.4 meters is a corner, the circumference is on both sides of the two 1.5X2 Just three meters so as long as one is enough, for example, 2.4X3.6 this size is not connected to the five, the connector as long as the four enough ~ ~ by size to what things are at a glance
Problem one, the ceiling per square keel dosage:
Main keel: 1 meter
Vice keel: 2.5 meters
Edge keel: 0.4 meters
Material Description:
1, the main keel spacing 1000mm, according to the construction specifications, ceiling distance between the main dragon 800mm-1200mm;
2, vice keel spacing 400mm, without brace;
3, the amount of keel is based on the length of the room ceiling are 10m calculation, such as the ceiling area length and width are 5m side of the dragon material 0.8m, the room is small to increase the amount of dragon;
4, for the theoretical amount, the actual construction of the budget materials need to expand the amount of loss.
Problem two, the specifications of the 600 aluminum slab plate ceiling keel dosage:
Light steel main keel: 1 meter
Triangle special keel: 1.67 meters
Edge keel: 0.4 meters
Material Description:
1, the main keel spacing to be 1000mm;
2, the edge of the keel budget according to the ceiling area length and width are 10m, such as the ceiling area length and width are 5m side of the dragon material 0.8m, the room is small side of the dragon material to increase.
3, for the theoretical amount, the actual construction of the budget materials need to expand the amount of loss.
