How many teeth of the 12 gear starter is suitable for the gear ring?
Your question has a problem, the 1332d1315c138c 12 starter gear, and the ring gear with a lot of them, 140.141 and 1951115 plus single cylinder gear, generally used in a single cylinder diesel engine, according to your installation position selection.
2, prevent the starter power is prematurely connected. Single tooth wear, ring gear can be turned to use; when individual tooth is damaged, can continue to use, but not in gear meshing gear, crank rotate the crankshaft to be bad, the ring gear and the gear of the starter ring gear two staggered; if serious wear should be replaced with new parts or welding repair. If the gear ring is seriously worn and the engine runs smoothly, the gear ring wear will be out of balance, so the balance should be corrected.
1. The flywheel ring is inserted on the outer edge of the flywheel after heating. It is fastened on the outer edge of the flywheel after cooling and is used to mesh with the starter gear to drive the crankshaft to rotate and start the engine.
Starter 12 teeth are 1332d, 1315c, 138C, 140, 141, 1115 and 195 and a single cylinder gear and ring gear with them, usually in a single cylinder diesel engine, according to the installation position selection.
