How much is the voltage of LCD driver? How much is it?
Extension cords are connected with the driving plate is generally the cross connection, manufacturers will be in the power supply board and driver board marked VCCGNDADJED some manufacturers directly labeled +5V +12V, which is the power driver board board input voltage. Then, the driving plate is supply voltage pin type cable screen screen has a white screen, the Department of power supply (typically five volts)!
In the AD board and the screen between the screen line can be measured, usually red line, or in the cable, one of which is VCC. To signal in the case of input signals, or the machine standby, there will be no screen pressure. Different manufacturers / sizes of screen screen pressure is not the same, there are generally +3.3V/, +5V, /+12v and so on.
In the AD board and the screen between the screen line can be measured, usually red line, or in the cable, one of which is VCC. To signal in the case of input signals, or the machine standby, there will be no screen pressure. Different manufacturers / sizes of screen screen pressure is not the same, there are generally +3.3V/, +5V, /+12v and so on.
