How should the ratio of textile roller be matched?
Some measures for correct use and maintenance of rubber roll * new cast cots should not be put into use immediately. Because the internal structure of the new cast rubber roller is not stable enough, if it is put into operation immediately, it is easy to reduce the service life. Therefore, the new rubber roller should be placed for a period of time, so that the roller to contact the external environment temperature and humidity, to maintain a relatively stable state, so as to increase the tenacity of the colloid, thereby improving the durability effect.
If the bad lubrication caused by roller shaft, wear, bearing clearance, will inevitably lead to uneven defects of color printing. At the same time, also due to jump glue, slip gum and other bad situation caused by printing bar mark. Therefore, usually should give rubber roller shaft head, bearing filling oil, in order to prevent mechanical wear, rubber roller normal use, to ensure the printing quality.
Use of COTS should be cleaned with plastic film, the colloidal packets together, on the roller frame, must not be a casual stacked in a vertical or conveniently on side wall, so as to avoid undue loss of colloid. Waste rollers in the transport process to the processing of the casting, avoid abandonment pressure or weight of chaos, and keep the core not partial core, do not bend, to ensure the normal use of the roller core. * rubber roller shaft head and bearing should be lubricated well. As we know, the shaft and the bearing rollers precision directly, directly affects the ink, Bumo effect.
