How soft is the carpet after washing?
After several dry foam carpet after washing, some foam debris and fiber bottom could not wash, then, must adopt the pumping method will bottom dirt, sand, water, and can make the rolling brush, absorb away dirt, restore the original soft and clean.
Push the machine aside and remove the brush head. (at the same time, the power plug should be removed at the same time) no one should step on the object before it is wet. At the same time, it should be dried and the air conditioner should be started to speed up the drying rate.Attention: all machines should check the power cord, plug and switch before use. After the machine stops, unplug the power source first. If stop the application of clean towel, contact the chemical parts with clean water, and return the machine to the damp place.
Carpet cleaning methods and techniques:(1) use upright vacuum cleaner to vacuum thoroughly. (if there is no upright vacuum cleaner can be used drum type dust machine).(2) clear clear stains first. (in addition to water soluble, oil soluble, colloidal stains)(3) the liquid medicine box is arranged on the wiping machine, and against the water dry foam liquid into the box, the best installation of electronic C box, using C box to reduce the foam water content.(4) will promote the wiping machine inside the washing place, plug the power line plug, debug the wiping machine lifting rod (the position adjusted to operate their own positions), and start the machine from indoor to outdoor each line overlap 1/3 scrub and mechanical walking direction from left to right, then move to another line from right to left, the operation is repeated until the full after scrubbing.
