How to adjust the garage door tripElectric garage door I would like to set the trip to the instructions lost the host above the four keys on the key to set the key to set the key on the code keys and four lights on the lights running lights there are two lights to the Supreme Please give pointers about how Tune the trip and how the code remote control remote control is not so how to make a few key how to thank Thank you
Up and down the location of the study is completed, the program automatically enter the switch door strength to learn: the door first to the direction of the door to run, while RUN lights lit, the door in the process of running, the program automatically measures the resistance of the door, On the in place, the automatic stop, delay after a period of time, the program automatically closed, this time STA light is lit, the program measures the power of closing, arrived in place, automatically stop;
Strength learning is completed, save all the learning value, while RUN, STA lights shiny several times, indicating that the program is completed;
Press the button on the remote control or the button on the wall switch, the motor is running as required.
Oh first press the set button for about 3 to 5 seconds a light flashing (forget which is about the status of the light) on the trip to the ideal height and then press the set button to another light to start the next set off the door off the door All right. Do not want too much to break the door will not bounce open. With the remote control press the long time to press the code to the long light and then press the remote control button at this time on the lights flashing in the press the remote control button success!
Press the FUNC key on the control panel, then the RUN light starts to flash, press and hold this button for more than 8 seconds, RUN light becomes straight, then the program into the door and the overload of the process of learning process;
Press the INC key, then the motor starts to run in the direction of opening the door, hold down, the motor running speed from slow to fast, while RUN indicator light flashes, indicating that the motor running up. After the desired position, release the button, the motor stops running; if you press the DEC key, the motor runs from slow to fast door, STA light flashes. Use these two buttons to adjust the position in place.
If the position of the upper position is adjusted properly, press the FUNC key once, then the RUN indicator will flash quickly after the start, indicating that the completion of learning on the same time; STA indicator light, the program into the next place in the learning process;
Use INC and DEC two buttons to adjust the next position in place, after reaching the predetermined position, press the FUNC key once, this time STA light flashes, indicating that the next place to complete the study;
