How to adjust the upper and lower limits of remote control garage doors
(OK) to the desired position Press the Setup key to turn on the lamp (Status light) Blinking Press the Close button (lower stroke) to the desired position (the next step) to the desired position. Address by setting the key to complete some open the door to automatically run up and down a trip
Remote control garage door upper and lower limits set:
1, to confirm the garage door power has been connected;
2. Press the "Limit button" immediately after pressing the "Set button" button on the motherboard to blink. Garage door body began to uplink, when the door up to the ideal position, press the "set button" to save the upper limit position;
3, save the upper limit position, and then press the "lower limit button", the garage door began to down, down to the ideal place to close, immediately press the "set button" to save the lower limit position; thus, the upper and lower limits set to complete.
Extended Learning:
1, remote control code, first press the code key seconds to light flashing, and then press the number of buttons on the remote control, the code is completed;
2, make sure the remote control battery has been properly installed, through the remote control to control the garage door open.
3, another motherboard there is a rebound adjustment knob, under normal circumstances do not need to adjust, the main role of the knob is to adjust the door body rebound, people standing under the door, press the remote control to the door down the door Body down when the hand to care about the door feel very hard, you can adjust the strength of the appropriate way, the adjustment only need to gently turn the knob to the left or right, transferred to the door down when the hand only gently The door will be able to rebound on the line.
