How to clean the electric traction truck everyday?
Check whether the battery housing of the electric traction car is cracked, whether the electric plate is exposed and whether the electrolyte is leaked.
Change the battery: 1. steps to ensure the tractor stopped; 2. turn off the power switch and pull out the key to open the battery cover; 3.; 4. out of the main power supply plug; 5. remove the main power cable; 6. undo battery limit bolt 7.; the lifting rope is fixed in the battery; 8. will be hanging out on the side of the battery; 9. in the reverse order will be fully charged, or a new battery back.
Open the accumulator water riser and check the level. 3. the electrolyte level must be higher than the 10-15mm.4. electrode after charging as electrolyte was not high enough, with distilled water at the bottom of the.5. can be added at least periodically remove the electrode plate on the oxide coated and non acid grease, locking.6. electrode clamp by hydrometer test electrolyte proportion, the value should be between 1.24 to 1.28. Note: if battery discharge more than 80% of its rated capacity, the service life will be shortened
