How to connect the LED lamp with constant current drive?
One end of the line connection method: one end of the LED tube is not connected, and the other end of the two pins are respectively lead to the constant current drive power. There is no connection between the two lamp holders. The biggest advantage is that if one end of the LED tube is connected to an alternating current, then the other end will not be charged. When replacing the traditional fluorescent lamp, you need to remove the original starter, change the starter fuse, and install the tube.
Both ends of the line is relatively early and also a common method, because of its convenient wiring, aging, simple and so on. So far, there are many LED lamp manufacturers. The two pins of the lamp cap are shorted together, then connected to the constant current power on the inside. Such a wiring method only needs to be removed from the traditional starter, so that it can work properly.
LED fluorescent tube wiring can be divided into three kinds, respectively, two ends into the line, single end into line and staggered into the line.
