How to connect the signal butterfly valve?
If you mean the signal of fire water supply system, there are generally three outlets, one public, one open and one off. Fire control system signal butterfly valve is normally open, so the signal butterfly valve to open position, with a multimeter to measure the 2 lines, the 2 lines into the input module is fine.
Signal butterfly valve is divided into two, 1) single signal, that is, signal instructions open or shut in place, only reflects a state, 2) double signal instructions, that is able to reflect in place or in place.
The signal butterfly valve should be the surveillance and alarm of human action. Once it is closed, it will alarm the system.Signal butterfly valve wiring method:1, open the switch box cover, according to the electrical control requirements, the cable core line to the corresponding terminal, and sealed cable imports, while the cable fixed, to prevent external force damage when the cable wiring.2, when the valve in the "closed" position, the clockwise rotation of the following relationship to the cam is just touch micro switch cam (you can hear the clicking sound), and then tighten the screw on the cam cam.3, when the valve in the "fully open" position, counterclockwise turn the upper open cam, with the same method to adjust the open cam.4, adjust the limit screw, when the valve in the "full off" or "open" position, should not make the limit screw just at the top of the worm gear limit plane, and should have a certain gap, and then tighten the lock nut on the screw.5, on the cover of the electrical switch box cover, when the valve in the "off" position, the pointer opening indicator to dial "0" scale, and tighten the screws pointer.
