How to debug satellite TV receiver
To see the relevant web page, Baidu also has video tutorials
First of all, the satellite, television, both ends of the connector is good, the line to plug in, or else how to make it unsuccessful,Is there a "information" (some of the stars) keys on the remote control? Click on the signal quality and signal strength of the indicator bar, where the intensity, indicating that the line is smooth, the quality of the alignment of satellites.Start small; adjust the antenna elevation angle and azimuth angle. (usually only need to adjust left and right)Adjust the azimuth and elevation angle of the antenna at the beginning (North South West is about 23.5 degrees, the elevation angle is 54.2 degrees, the south is about 75 degrees west, the elevation is 54.2 degrees), is not the same place, angle is not the same, at the beginning of a good adjustment after the power and turn on the TV receiver, the television set to AV (video) stateUnder normal circumstances are in place to buy to try a good fixed elevation, to take back, back is mainly transferred to aim at the satellite direction, do not adjust the angle and position of the satellite is mostly South west. Under normal circumstances, the signal strength is more than 60, do not need to tune it, the most important thing is to adjust the quality of the signal.Put pot on the house in the South West, small receiver move slowly, generally the best 2 individuals, a move above a small pot, below watching TV signal quality. I believe it will be done in a few minutes. To move slowly, be patient, because its signal quality is easy to move, it is easy to change, the best good quality is also transferred to more than 60, so that you can receive about 40 taiwan.The last step is fixed, there are professional fixed, but I take a few bricks, head pressure on it.
