How to disassemble solar vacuum tube
1, the first time you remove the best choice is cloudy, morning or evening, because you must first put hot water in the solar water heater all let go before the demolition (to avoid demolition by hot water scald, the exudation of) if it is noon, because the water in the vacuum tube has the strong sunlight will shine and loss vacuum tube, vacuum tube will shorten the life of.
3, remove the put method: the use of detergent or washing powder soaked in water to lubricate the vacuum tube and the water tank is connected, then turn around and then push to slightly, the other end of the vacuum tube clamp spring out in the vacuum tube from the tank gently pulled out.For security reasons, it is strongly recommended to find a professional demolition workers, (usually spent about 100-200 yuan).
2, the demolition of the best use of detergent or washing powder soaked in water to lubricate the vacuum tube, and the vacuum tube angle should be sent along, avoid cross angle shenglayingche to prevent the vacuum tube burst. After removing the vacuum tube to use special polyester foam grid installed, put in a special box, to prevent knock in transit. The most important thing is the removal of the vacuum tube, because this step is the most difficult for non professionals who are most dangerous. Once the vacuum tube is removed, it will be done
