How to do a good job in car polishing? And how do you use the polishing machine?
1., the machine flat, counter clockwise rotation, remove the 100 pad pad fixed folder, choose a clean and appropriate 100 pad pad assembly, to ensure that fastening.2. connect the power supply, put down the handle, press the safety post and start the machine switch.3., the work of the line is generally a straight line, work should pay attention to the surrounding crowd, especially children.4. polishing machine is applied to wax and dry hard ground (marble, granite) operations.
1. The thickness of the grinding wax used in polishing depends on the oxidation degree of the paint. Particles such as sand wax are generally thicker and are used to grind off deeper scratches, but damage to the paintwork is greater; if oxidation is not evident, wax and polishing can be used to combine the products.2, the general car finish quality is good, is not recommended when polishing and waxing or glazing.3, when you need to polish, you must go to professional beauty shop, not only the quality of wax is guaranteed, and professional technicians can also minimize the damage.
1, car wash, iron powder and impurities.2, check all the paint, confirm the paint on a scratch, oxide layer, acid rain spots, dust, and other defects of orange peel.3. Do shading treatment around areas where paint treatment is necessary.4, grinding, grinding is the use of abrasives to solve the paint, oxidation, stripes, pollution, fading and other influence on the appearance of paint deep problem.
