How to identify natural stone and artificial stone
Observe the back of the stone to see if there is no small pores, if any, indicating that the quality is relatively poor. From the artificial marble manufacturing process, the manufacturing process to be pressurized and vacuum, under normal circumstances there is no possibility of porosity. Third, with the nail on the surface of the stone, qualified products should not be obvious traces. Artificial marble surface has a certain hardness, if only with the nails can be traces of the surface of the stone, then the quality of this product is too bad.
Look at the surface, must be very flat and bright, it is best to reflect the silhouette to.
Artificial marble and artificial quartz stone can also be used as kitchen countertops, etc., but the hardness is somewhat worse than artificial stone. For artificial stone, it is difficult to see from the surface of its quality advantages and disadvantages, so the most reliable way to the business or ask the stone physical properties of the test report.
And we need to pay attention to the test data and artificial quartz stone is the same, or stone water absorption problem, because it determines the artificial stone anti-fouling properties. The higher the water absorption, indicating that the smaller the density, the more loose texture, oil and so the more easily penetrate.
