How to identify the quality of anti-corrosion wood quality?

Answer:

4, raw materials should be dried before doing anti-corrosion treatment ???? There are a lot of manufacturers are directly to the raw materials will be sawed directly to the anti-corrosion treatment, because the raw materials did not first by the cooking and drying, raw materials, a large number of water, anti-corrosion agent into the wood effect will be greatly reduced, It will not be ideal.

3, anti-corrosion agent into the depth ???? Antiseptic wood production is the use of vacuum tank pressurization, the agent, the tank should be less than the atmospheric pressure of 16 standard atmospheric pressure, the pressure time about 8 hours to press into the wood, the penetration of pine or less than 15mm The Fir, then infiltration or less than 20mm.

2, anti-corrosion agent concentration ???? Depending on whether the concentration of the original concentration of 1:10, many manufacturers said that the use of 1:30 concentration, in fact, is watered, so that the concentration of lower costs and cost savings, its anti-corrosion performance is greatly reduced.

1, anti-corrosion agents ???? At present the best, the most environmentally friendly preservative is ACQ, the market most of the anti-corrosion wood is the use of CCA, its corrosion resistance than ACQ stronger, slightly more environmentally friendly, but the price is cheaper.