How?to?install?artificial?turf?grass？
The flat out on the non-woven lawn lawn in accordance with the original specifications need to overlap between 3 to 8 mm.Use lap lawn cutting knife cut flush, seam should be not more than 10 mm.Cutting area bottom seam of cloth, brush on the grass on the surface of the joint special glue, touch drying followed by merging knock firmly.
In the grass after the basic splicing, designate each function to stay again, the position of the line and point to cut paper knife, cut out the article grass, will be connected into, optimum coating glue, put ready original white grass line back, consolidation pressure.
Grass paving after joining together, turf fold part of the need to paper knife mouth, straightening and docking, overlap, and cementation;turf all processing has been completed, start with sand.
The?flat?out?on?the?non-woven?lawn?lawn?in?accordance?with?the?original?specifications?need?to?overlap?between?3?to?8?mm.Use?lap?lawn?cutting?knife?cut?flush,?seam?should?be?not?more?than?10?mm.Cutting?area?bottom?seam?of?cloth,?brush?on?the?grass?on?the?surface?of?the?joint?special?glue,?touch?drying?followed?by?merging?knock?firmly.
The field length direction laid non-woven, orientation and direction of the arrangement of the lawn into 90 degrees, non-woven adhesive between firm.The rule to the pitch line of line length specifications, according to the drawing through introspection stick fine lines must be strong and flat.
