How to install furniture slide way?

How to install furniture slide way?

Drawer slide is a member must return to meet many drawer assembly and disassembly process, professional system does not need the installation of the background support, on the contrary, as long as the reference information, and be patient for a series of related operations, so we can also successfully assembled. Above we obtained information from a consumer perspective is the content of what we learned in the actual practice, should first determine the drawer slide type, and then try the operation when necessary, can also help others.

First of all, you need to determine the kind of slide at home, such as three tracks, two tracks. Then pull out the cabinet easily, but when you pull out, you must maintain a smooth state, so that when you pull out, it will not damage the cabinet and track. Take a look at whether there is a sharp button on either side of the cabinet. If you see it, try to press it downward with your hand. If you press it, you will hear a click, and then you will take out the cabinet.But when you press, you must not too hard, if the pressure does not understand that something stuck, you need to check. After pressing, take it out gently, and keep it flat so that it doesn't hurt the rails too much. Then pull out after check whether the drawer rail is due to deformation, or other situation, if the deformation, usually adjust the location of deformation in the fixed well, according to the original way, put it into one, this can easily complete the drawer slide disassembly, and two a big problem of installation.

1, drawer slide is divided into three parts: moving rail (internal rail), middle rail, fixed rail (external rail)2. Before the slipway is installed, the inner rail, that is, the movable rail, should be removed from the main body of the chute. Be careful not to damage the slipway when it is disassembled. The disassembly method is simple3. The outer rail and middle rail part of the split slideway are first arranged on both sides of the drawer box body, and then the inner rail is arranged on the side plate of the drawer. If it is finished furniture, in the drawer box and drawer side, there are manufacturers in advance to make a good hole, easy to install, if it is on-site production, you need to drill their own.When installing the slipway, it is recommended that the drawer be assembled into a whole. There are two kinds of holes on the track for adjusting the top, bottom and front and back distances of the drawer. )

First determine what install drawer slide slide, is generally used in section three hidden slide, please according to certain data, determine your drawer length, and the depth of the counter, to select the appropriate size installed in the drawer.Secondly, the five plates are assembled by screw, drawer, drawer panel with a slot, after processing, the drawer has been installed in the drawer, let the adjusting screw holes coincide, then push the locking drawer locking nail and slide.Finally, the installation of cabinet, you need to first side of the plastic hole on the side of the cabinet screw, and then installed on the track from the above, a slide, respectively, using two small screws, one after the fixed. Both sides of the cabinet should be installed and fixed

Drawer slides are commonly used in furniture fittings, guides for moving drawers or other moving parts, and are often equipped with bearings. The drawer of the material of the pulley is determined when the comfort of the drawer slide, plastic pulley, wear-resistant nylon, steel ball is the three most common drawer pulley material, sliding silent, comfortable and smooth, it is the best way to distinguish the quality of rail.