How to install the adjustment lift
1: the main and vice two columns side by side on the ground, the beam installed, pay attention to all the screws must be tightened 2: beams on the wire rope, tubing, limit line, so stand up and do not climb The beam on the area to install things 3: 3 side, the column upright, adjust the position 4: measured with the level, adjust the two columns are not tilted, not twisted. And then use the horizontal tube to measure whether the column is in a horizontal plane, do not have to add pad pad pad 5: to determine the column is not tilted, the expansion of the expansion screw. 6: oil pump connected, plus the Great Wall 46 hydraulic oil, 7: to determine the cylinder chain, wire rope connection in place, click the lift to determine the voltage positive and negative. 8: lift a car, raised about 0.6 meters high, locked in the insurance position 9: the two wire rope can be tightened
1: to determine the location of the installation, the two flat beam with a height of 0.5 meters pad pad 2: two plates on the beam, fixed 3: the four pillars put 4: wear wire rope 5: column and block block Stay 10mm distance 6: the main column expansion screw to play a 7: the lift up, adjust the gap 8: all play expansion screw 9: with the level of measurement, adjust the four columns are not tilted, not twisted. And then use the horizontal tube to measure whether the flat plate in a horizontal plane, not to adjust
1: the main and vice two columns put up (here and the gantry is different, the gantry is flat on the ground to wear wire rope), put on the wire rope, tubing 2: put the floor 3: measured with the level, adjust the two columns do not tilt Not distorted. And then use the horizontal tube to measure whether the column in a horizontal plane, do not have to add pad pad pad 4: to determine the column is not tilted, the expansion of the expansion screw. 5: oil pump is connected, plus the Great Wall 46 hydraulic oil, 6: to determine the cylinder chain, wire rope connection in place, click the lift to determine the voltage positive and negative. 7: lift a car, raised about 0.6 meters high, locked in the insurance 8: the two wire rope can be tightly consistent
