How to install the cabinet LED lamp strip?
The installation place of cabinet lamp is very important, can install the lamps and lanterns in the lowest place of ambry of the top floor, reduce the shadow when working. A straight line incandescent lamp or fluorescent lamp should be mounted in front of the cabinet. In this way, part of the light from the lamp will be directed at the tailgate, then reflected on the operating table and then directed to the center of the kitchen. Can also be installed above the cabinet lighting device for indirect lighting, such as small spotlights, according to the upper part of the cabinet, not only dazzling, but also easy to extract.The lighting system in the kitchen should be adjustable to allow people to feel more comfortable and comfortable when the lights are dim or dazzling. The color temperature of the lamp should be consistent with the atmosphere of the room, at least as much as the color temperature of other parts of the room. Do not install only a single light source in the middle of the kitchen. In order to make the kitchen more perfect, you should install a multi-level lighting system consisting of different lamps and light sources in the kitchen.
Cabinet lamp installation:Cabinet light installation note, before the water and electricity transformation, cabinet designer first come to measure time, need to tell the designer to add light, when designing the cabinets and hydropower, will take into account the lamp placed, advance reservation line lamp. The general line of advance reservation in the cabinet lamp back behind, so do not see any pipeline displacement in appearance, more beautiful.Before installing LED cabinet lamp, first cut off the power supply, and avoid live installation;Electrician or someone with relevant experience should be installed;Place the lamp on a non combustible object with wood screws; avoid areas above the heat source, direct sunlight, air flow, and temperature changes;In front of the sensor, do not have an obstacle that affects it or a heat source that has been moving;To ensure maximum detection range, ceiling mounting height: 2.5-3M, wall mounting height: 1.8-2m;Do not use sharp objects or coarse touch induction pollutants lens; induction switch should be installed in position at a distance of more than 50cm and the lamp, and avoid light shine directly on the sensors.
Home decoration, many consumers will choose to install cabinets in the cabinet lights, this approach to better solve the problem of insufficient light in the kitchen. Then, in the installation of cabinet lights, should pay attention to what problems? Below, Xiaobian tell you about cabinet lamp installation methods and precautions, interested friends together to understand it!
