How to install the car LED lamp belt?
The four line LED lamp belt has four leads, three row lights (note not four row lights), each row 1 meters, 24 lights, 24 * 3=72. For each lamp power is 0.05W, power LED lights with 72 beads are: 72 * 0.05=3.6W.
When the LED light belt device, the ordinary put in the lamp slot, can be straight, also can use string or fine wire fixed. For external or vertical installation, required a clip and a tail plug. The original clip is fully illuminated and it is better to put waterproof glass in the stopper and plug at the end of the assembly so that the waterproof performance will be better.
Every meter has a "hinge shear" mark, only in the mark must be cut, scissors or scissors will lead to one meter is not bright! Some will play a bit biased when marking, it is best to carefully look at the next sign of the status of the Department, according to the center did not connect to the local shear can be. Look carefully and you can see.
Each LED lamp belt must be equipped with a special plug (plug with transformer); when connected, it is necessary to remove the bright plastic cover, then connect the test lamp and then cover it. Cannot cut directly with the lid join, such short circuit is easy!
