How to install the solar vacuum tube correctly, what is the standard of water tank adjustment
The glass tube is aligned above the water tank is inserted glass tube hole, dipped in water to slowly screwed in, stay at the bottom of the glass tube can be plugged into a tail support hole, then the glass tube is screwed down slowly, at the bottom of the glass tube into the tail support hole even if OK, finally adjust the dust ring, even if the end to play with water. In case of some glass tube apron leakage, and then according to the opposite step to remove the glass tube, adjust or replace the apron, and then according to the above steps on the line. When installing the gloves to prevent accidental rupture of glass tubes.
The installation of the glass vacuum tube is very simple, first water glass tube with holes inserted below glass tube tail support hole should be aligned, and then fixed the water tank, begin to water with water outflow and then open the glass tube box (to prevent sun exposure to high temperature, easy to see cold water pipe explosion)
Manufacturers generally have technical staff guidance, they will not be able to try, it is necessary to have technical
