Brush a layer of cement slurry, to prevent slipping. And finally lay the carpet.
First, clean up the stairs and then brush a layer of floor glue and put a carpet on the it.
Carpet paving generally has two methods, one is the simple paving method, sticking the carpet on the ground with adhesive directly, which is also known as B pavement; another way is to put a layer of rubber or foam cushion on the ground, and then pave the carpet above it, and fix the carpet with nailing strips installed around the edge of the carpet, splicing places need to use hot tape to bond together, this approach is called A pavement. Before laying the carpet, you should first clean the surface of the ground. Such as the wood floors, the loose or broken floor should be repaired first. If pave on the cement floor, the sunken and carina should be patched and chiseled .. If the cement ground is easy to be damp, you can brush the cold primer oil first or lay a layer of asphalt paper. design the pave scheme before laying. if the carpet needs splicing, you should place it in an inconspicuous place or to the seam that is not easy to suffer harm. it should have 1 mm gap around the wall. pay attention to the direction of the wool while splicing in order to avoid cromatic aberration. hammer concrete steel nails on the ground around the walls... All the nails should be slightly inclined to walls, it means stick the carpet on the ground with adhesive, in splicing place, chisel the carpet. if carpet needs to be spliced. If pave on the cement floor,