First trim uneven fluff in joint, cleaning off the fiber, using paste way to fix. Cutting carpet should cut along the carpet warp. Cutting superfluous edge of the carpet, and repeatedly rub fluff in joint place, seperate hair from the obverse side. Snap the line on the back of carpet according to the calculation of the material size, just cut the weft, cutting: The primary ground treatment, actual measurement and pay off, cutting carpet, frictioning and cooling, laying silver pressing, clean up, until to make seam trace cannot be seen on the surface: Before laying, the actual measurement is required, find warp and protection. The joint place should be sticked together with tape on the back of the carpet, don't warp When binding and paving , cooling in air for 5-10 minutes after frictioning, the main points of construction, laying until the glue becomes dry and sticky, measuring the corner to see whether it is regulated side. After paving the carpet, using felt roll to extrude bubble, record angles correctly, as for the carpets with backing lining, after cutting weft yarn the construction process of laying carpet.
