How to look at the toilet good and bad
High temperature fired toilet water absorption is very low, it is not easy to inhale the sewage, resulting in odor. And some middle and low toilet water absorption is very high, when the suction into the sewage is very easy to issue an incredible smell, and difficult to clean. A long time, but also the phenomenon of cracking and leakage. In the selection, you can gently hit the toilet by hand, if the percussion sound hoarse, unclear and so loud, then the toilet is likely to have split, or the product is not cooked.
High-grade toilet because of the high temperature when firing, to meet the requirements of all-ceramic, so weigh in the hands will have a heavy feeling. While the low-grade toilet firing temperature is low, the time is short, so did not meet the requirements of all-ceramic.
Whether the design of the pipeline scientific and reasonable impact on the toilet flushing effect. Under normal circumstances, in the purchase of toilet before the first try to flush. Formal standards, in less than or equal to six liters of water in the case of three flush, the toilet on average to be able to at least five water table tennis out.
Gently touch the surface of the toilet, if there is no rugged feeling, and feel the glaze and the body feel are very delicate, which shows that the quality of the toilet is better. If it is in the low-grade toilet, the surface of the glazed and the body will be relatively rough, dark colors, light irradiation will be found under the hole.
In the selection of the time, but also hand into the toilet's mouth, touch the inside is smooth. If the rough feel that there is no glaze inside, so the toilet is easy to leak. And the toilet seat gasket should be made of rubber or foam plastic, such a strong elastic seal, sealing performance.