How to maintain the legs and legs of heavy furniture
No adhesive is required for mounting the sleeve. The casing shall be close to the bore, and larger bushings shall be used if it cannot be secured. Then insert castor into the bushing. That should solve the problem. If the furniture legs are split, remove all the casters of the furniture. Pour a bit of glue along the crack, then press the gap between the glue and wipe the excess glue. In order to increase the strength of the fracture, several fine black wires can be wound at the crack. Many furniture casters have bumps or cracks at these locations, and the wiring marks are not very visible. If the furniture legs are not carved or decorated, the triangular file can be used to file the grooves along the entire length of the leg and then to be twisted with wire. Handle all the furniture legs in the same way so that all the furniture legs are identical. If the metal cap does not work, the extension leg can be installed.
Ignoring the problem for a long time, the casters may fall off or the ends of the legs may crack at the time of lifting the furniture. These two problems can be solved. The metal or plastic sleeve can be used to fasten loose casters, which have a number of specifications for ease of use. Remove loose casters and drill holes into the legs of the furniture.
Push heavy furniture, although it will not make furniture immediately broken, but there will also be some problems, old furniture is particularly common. But this structural fracture can be repaired. Loose furniture casters and casters are fixed with a metal bar drilled into the bottom of the furniture leg. When moving furniture, the stress produced by the castor wheel will destroy the surrounding wood and enlarge the aperture, thus leading to the loosening of the casters. If the damage is not very serious, the casters are only loose.
