How to operate dump truck?
Lift the cargo box, dumping load (the engine is running normally, the pressure is about 0.8Mpa, the circuit is free of trouble)1.1, stop the vehicle, pull the handbrake, (with the back door manual locking mechanism should open the locking mechanism of the clutch pedal) wait for about 5 seconds.1.2. Turn the neutral switch (on the vertical surface of the instrument panel ahead of the steering column) to the horizontal position.1.3, the PTO rocker switch on the dashboard of the press (Note: open the switch lock and then press down).1.4, the tractor forward (or two), pay attention to in the process of lifting the engine speed control in 1000 ~ 1500 rpm.1.5. Gently lift the handle of the control valve to make it out of the limit groove and move to the "rising" position.
Step on the accelerator pedal and slowly release the clutch pedal. Cargo compartment can rise. Automatic limit when the freight car reaches the highest position. The operating valve handle is then placed in the "middle stop" position.
Lift halfway stop, lift on the way to stop lifting the cargo compartment does not move, you can step down the clutch pedal or move the valve handle to the "middle stop" position, the cargo compartment can stop.
