How to prevent the transmission shaft from breaking and falling off?
Must be maintained regularly in accordance with technical specifications. Make sure the parts are well secured and well lubricated.The strict implementation of the standard maintenance, maintenance in V type with a dial indicator measuring shaft bending, if more than 0.SInmSubject to correction.Lubricate the intermediate bearing periodically, and install the bearing cap properly, adjust it in use.Replace the worn cross axle, bearings and other transmission parts in time.In the use of vehicles, attention should be paid to starting, shifting smoothly, reasonably using clutch and brake to reduce the impact of power transmission.
When the maintenance operation is not strictly carried out, the operating rules of the repair process are not strictly carried out, and the parts of the transmission shaft are deformed at random.The driver's improper operation, the drive shaft has a great impact on the result of damaged parts.The support deformation changes the vertical position between the drive shaft and the rear axle axis, twisting after mounting bolt flange in transmissionShaft abscission. Preventive measures:
The dynamic unbalance of the drive shaft assembly goes beyond the standard specification.Deformation of transmission shaft, balance strip fall off, balance of bearing cap, asymmetry of gasket, etc..Loose or damaged bolt of transmission shaft.The assembly of the drive shaft is not proper and the edge 4 bolts are not tightened according to the specified torque; or a certain screw is slipping and the cross bearing is lack of slidingGrease and improper lubrication etc..
The automobile transmission shaft is an important part of transmitting the power of the transmission to the rear axle. If it breaks or falls out during the use, the capacity of the transmission shaft will be reducedTurning over vehicles easily will have serious consequences for safe driving. Therefore, in the use and maintenance of automobiles, corresponding measures must be takenApply to prevent the occurrence of such accidents. Causes of fracture and failure of transmission shaft:
