How to use and clean the broken aluminum doors and windows?
Often check the broken bridge aluminum window frame wall joints, the course of time if loose so that the overall deformation of the framework, so that doors and windows can not be closed, sealed. So the connection of the screw loosening should be immediately tightened, such as screw feet loose, the application of epoxy strong glue to adjust a small amount of cement seal.
Broken bridge aluminum doors and windows in the use of the process, should be gently push pull, push and pull its natural; found that there is no need to force, should first rule out the fault. Fouling, deformation is the main reason for the difficulty of push and pull of aluminum doors and windows, to keep the door frame clean, especially the cleaning of the slot. Vacuum cleaner can be used to suck the tank and the door closed the fouling.
Should always check the tightening bolts, positioning shaft, wind support, to spring, etc., the timely replacement of damaged parts, aluminum doors and windows of the vulnerable parts. Regularly add lubricant to keep it clean and flexible.
1, clean off the bridge aluminum doors and windows, people must not step on the aluminum frame, can not pull the frame for support.
2, sealed tops and glass glue is to ensure that the bridge aluminum doors and windows sealed, heat and waterproof the key, if the fall to timely repair, replacement.
3, broken bridge aluminum doors and windows can be used soft cloth stained with water or neutral detergent to wipe, can not use ordinary soap and detergent, but can not use decontamination powder, toilet and other strong acid cleaning agent.
4, after the rain, should be timely glass and window frames of the rain beads, with particular attention to the chute water. Chute with a long time, increased friction, can add a little oil or coated with a layer of wax oil.
