What is the ratio of the capillary and copper tube in the fridge and freezer?
Horizontal freezer with a diameter of 8mm copper tube coil in general, from the mouth of 5-6cm refrigerator dish in the first circle, and then by ring down plate, each ring spacing of 7cm, about 10cm from the bottom end. The coil is connected to the top of the capillary, the bottom corner opening is connected with the compressor inlet. The coil should be smooth, turn to be accurate, appropriate length of the two parts the card will be fixed on the aluminum coil clamp fixed on the inner wall of refrigerator, without width.The length of the coil: measurement of horizontal freezer freezer wall in a circle circumference; the depth of upper vacated 5CM, at the bottom of the rest of the vacated 10CM, according to the depth of every 7CM disc in a circle, the circle number required coil plus 1 ring (the first circle); the total length of the coil is finally on the perimeter. As measured. The freezer is 1.6 meters, depth of 50 cm.Formula: total length m= (/m-0.15m / 0.07m+ refrigerator freezer depth) /m X - /m perimeter perimeterFor example: the total length of m= (0.5m-0.15m), 0.07m+1.6m X1.6m=10.56mCapillary, no matter how long it is outside the original box, keep the original length, and then the 1.2-1.5m (the length that was buried in the box) is the same as the capillary tube of the specificationThrough the capillary clings to the bottom from the upper angle into the first ring (tube hole should be close to the corner, wearing at the bottom of the capillary and the return pipe are from hole piercing). Such as refrigerated dual-purpose freezer, frozen capillary advanced tube.Compared with the vertical coil pipe has three sideways point: 1, do not waste the corner (not accounted for) refrigerator space; 2, no accumulation of condensed water, so as to avoid the wall decay; 3, running or stopping after the initial boot can effectively avoid liquid hammer compressor.Fast method of self-made refrigerator evaporator and capillary tube!
