How to use concrete mixer properly and safely
Operation method: 1 concrete mixer concrete mixer should be placed in a solid place, with a bracket or shelf stable tube feet, not to replace the tire support; 2 concrete mixer must be checked before starting the controller is good; 3 concrete mixer rises in the feed hopper, for safety, prohibited personnel through or stay in the hopper. After the mixer hopper fixed; 4 concrete mixer operation, no tools into the drum, more to Caution!; 5 concrete mixer on-site maintenance, to fix the mixer hopper, cut off the power supply into the mixer drum, outside to have guardianship. (concrete mixer operator (driver) must be trained in safety technology, test qualified, certified, prohibited non driver operation.) 6., concrete mixer must be cleaned after use, especially in winter, no foreign objects in the drum before use, so that it can extend the service life;
Operating procedures1, before mixing, should be empty test run.2, according to mixing time adjustment time, relay timing, pay attention to the adjustment in the case of power failure.3 、 wet mixing drum and blade and site.4, the process, such as electrical or mechanical failure, should be unloaded part of the mixture, to reduce load, after troubleshooting, and then drive.5, the operation should be checked regularly, to prevent electric shock and mechanical wounding and other safety incidents.6 、 after the test, turn off the power supply, clean the mixing drum and the field and clean the room.
Concrete mixer operation steps:1. Switch the function switch on the column to the "automatic" position and press the start switch on the controller. The whole operation program will automatically control the operation.2, the whole process after running automatically stopped, in the operation of the project, if you need to stop halfway, you can press the stop button, then you can restart.3, press the start button, the display is beginning to show time, slow, sand, fast, stop, fast, running lights flashing on time.4, automatic control, you must manually switch all the functions to the stop position.
