Home > categories > Machinery & Equipment > Heat Transfer Equipment > How to wash hot water exchanger heat
Question:

How to wash hot water exchanger heat

How to wash hot water exchanger heat

Answer:

Heat exchanger to heat of high temperature medium (plate, spiral plate, etc.), through a wooden partition wall (wing leaves tube, coil, coil, etc.) is passed to the lower temperature of the medium, in order to achieve the technological requirement. The more hot water heat exchanger volume, the greater the storage. During the heating, the water stored in the heat exchanger and heating water temperature is the same. When finished with a bucket of hot water, no management, heat exchanger automatically add cold water; After more than 10 minutes can emit hot water again, because the proportion of hot water is light, short time above transformation of hot water is concentrated in the cylinder. How much hot water is according to the users of heating temperature and the discontinuation of the length of time to decide. The higher the heating temperature, stop using the longer barrel storage of hot water temperature is higher, until reach the heating temperature, ensure the required.
The simplest is to use clean with weak acid, vinegar, take in and out of the gate with a metal hose, poured the vinegar in a period of time, in the repeated washing. A lot of heat exchanger cleaning methods 1, join in the heat exchanger cleaning liquid circulation, can take some dirt. 2, flush with water cannon directly. 3, the most radical approach is removed all clean.
Cleaning method: flush with water cannon directly or join in the heat exchanger cleaning liquid circulation, can take some dirt. The most radical approach is removed all clean. 1, direct circular: hot water to the water heater in loop heat pipe heat transfer directly. 2, the circle of indirect: using in the heat exchanger in water heater, the heat pipe working medium inside the circulating heat exchange. Generally USES the heat exchanger coil structure. The heat exchanger in the process of heating and heat recovery heat, use of heat exchange.
A lot of heat exchanger cleaning methods 1, join in the heat exchanger cleaning liquid circulation, can take some dirt. 2, flush with water cannon directly. 3, the most radical approach is removed all clean.

Share to: