How to wash off the printed logo on ceramic tableware
The logo is not printed, glazed, if you want to get down only with emery cloth polishing.
One is the traditional paper can be made with any shape shape, it has been attached to the wet molding (porcelain, artifacts can be burned again, can also be posted on the green), paper paste after a layer of transparent glaze is under glaze, the temperature reached 1300 degrees C. If there is a good paste porcelain in the firing, can not above color glaze glaze firing temperature is 800 DEG C. The baking process is completeThe two is a modern version of the screen mapping. Then brush the paint or something elseSolution plus points to answerThat is the first, and can not find a solution that will add points.
If the paper baked up, then I suggest you change a table! If it is printed on the back of the ink, dilute hydrochloric acid!
According to what you say is ceramic glaze, you can use the following methodsHydrochloric acid on the water, the proportion seems to be 1; 80, with chopsticks dipped a little paint down a few, remember to be careful!We make our own, this should be effective!
Sir, the LOGO on the silk screen is printed up, like we are in the disinfection of tableware and customers for the sale of porcelain, are resistant to high temperature, there is nothing in the disinfection cabinet.
