Home > categories > Home Appliances > Ice Makers > Hzb-25/bf ice machine instructions
Question:

Hzb-25/bf ice machine instructions

Hzb-25/bf ice machine instructions

Answer:

Then the drain nut is screwed down, open the packing box of ice machine ice machine; open the packing box and packing bags, packaging foam removed, check in ice making machine manual, ice spoon, ice bar accessories are complete, if there is a shortage, please contact the seller and timely.8. Clean the ice maker again with tap water and dry with a soft cloth. Place the ice maker in a horizontal place, but notPlace in direct sunlight, not near the heat source (such as the sides of the heating furnace, stove or refrigerator radiator)Make sure that the ice cooler does not allow the object to be blocked and that there is no obstruction in the 15cm due to obstructionThe wind will seriously harm the equipment; in the use of ice making machine, ice making machine will be the best place for 1 hours, maintenance and cleaning systemIce machines have been cleaned before leaving the factory, but they are recommended to be cleaned again before use.
5, ice machine after working for a period of time, the machine may be water shortage, water shortage, water shortage, indicating fine light "Add Waster" will be bright, when water shortage, please press "Power" key,Let the ice maker stop working, add water to the machine, and press the "Power" button, the machine re-enter the system.6, ice column full ice, ice chance automatically stop work, and at the same time, "Ice" indicator light.7. When the ice maker is not in use for a long time, please clean the water in the machine. Before draining, please put a water container under the drain hole at the side of the ice maker,
3. Place the ice bar in the original position and cover the upper cover. You can make ice by pressing the button.4, according to the different environment temperature and the choice of ice making model, each ice making time is 6 to 15min, ice makerIt is better not to use it outdoors or in direct sunlight.
1. Insert the ice machine power cord into the three-phase socket with grounding, the power indicator light starts flashing at intervals, and the ice maker entersMachine status;2. Open the front cover, take out the ice bar, add artificial water to the inner container of the ice maker, add water, the water level can not exceed the most on the inner wallHigh water mark line

Share to:

Hot Tag