Click the desktop properties settings advanced monitor, then change the screen refresh frequency to higher.I tried this oneNo effectIs there any other way?
Check whether the power, interface and other places are loose.If it is a liquid crystal display, you can refresh the rate to 75HZ, generally does not harm the display and hardware.Take the blank table top to the right mouse button".If it is a CRT display, it may be affected by magnetization. Magnetization is mainly due to strong magnetic interference nearby, and other electrical appliances or small rooms can cause them.It is recommended to try to move the monitor somewhere else, or to move other magnetic disturbances to other places. If there is a ripple, the monitor degaussing coil is out of order. ?Check the video card: clean the inside of the box, see if it has been surrounded by dust and the like, clean with a brush.Liquid crystal display water corrugated, generally due to data line between the graphics card and a liquid crystal display device has a problem, or check card interface, or check the display data line interface, according to this idea mostly can solve the problem of liquid crystal display flash. Or the video card itself is a problem.
LCD bar?. Find the instruction manual and set it to the best resolution and refresh rate.Also check if the power is stable.
Several solutions for display with wavy lines:1, check the power supply, interfaces and other places are loose2, if the LCD display, you can refresh rate to 75HZ, generally does not harm the display and hardware. Note that a low refresh rate is harmful to people's eyes. Operation: blank desktop, right mouse button, property, setting, advanced monitor, monitor setting, screen refresh frequency (can)3, the blank desktop, right mouse button, property, setting, advanced, troubleshooting, hardware acceleration, "no - all" changed to "no" try!4, if it is a CRT display, it may be affected by the magnetization. Magnetization is mainly due to strong magnetic interference nearby, and other electrical appliances or small rooms can cause them.I suggest you try to move the monitor somewhere else, or other magnetic interference (such as audio) moved to other places, if there is still ripple, indicating that the display degaussing coil is out of order;If it is normal elsewhere, it means that your room has too much magnetic field interference.5, check the video card: clean the inside of the box, see if there are dust surrounded, and so on, with a brush clean up. Liquid crystal display water corrugated, generally due to data line between the graphics card and a liquid crystal display device has a problem, or check card interface, or check the display data line interface, according to this idea mostly can solve the problem of liquid crystal display flash. Or the video card itself is a problem.
