In addition to using the PLC to step the pulse signal to the motor controller, what els
The controller, control card, and MCU can send pulse signals to the motor controller
Single chip, motion controller, motion control board etc. As long as can send pulse of all can.
A sudden change, a very short voltage or current is called an impulse signal. It can be periodic, it can be either non-periodic or single. Pulse signal is a kind of discrete signal, various shape, compared with the ordinary analog signals such as sine wave, the wave in time axis between discontinuous (waveform and waveform has obvious space between) but has certain periodicity is the characteristic of it. The most common pulse wave is a rectangular wave (or square wave). The pulse signal can be used to represent information, also can be used as a carrier, such as pulse modulation, pulse code modulation (PCM), pulse width modulation (PWM), and so on, also can be used as all kinds of digital circuit, high performance chip of the clock signal. A pulse signal performance on the plane coordinate is a countless breakpoint curve, that is to say, in some parts of the periodic point limit does not exist, such as sawtooth wave, there are computers used in digital circuit of the signal, 0, 1. Pulse signal, that is, such as pulse signal, the dc, relative to the discontinuous signal, if use flow description, dc is open the tap drips water, pulse is constantly switch leading to form water. You turn the flashlight on the light, this is dc, you switch the lights and the lights out, the pulse is formed, the fast speed of the switch is the pulse frequency.
