In the hydraulic system, the hydraulic component of the panel installation is directly installed in the oil circuit block, or is the connection plate connected to the hydraulic valve?
Hello: The answer is simple: the plate installation is connected by a mounting plate and the corresponding pipe that connects the valve and the oil outlet to achieve the design intent. But you need to know more about the basic knowledge and common sense of hydraulic valve installations. Hydraulic valve installation is divided into four types: pipe connection, plate connection, integrated connection and superposition. The plate-type connection is to arrange the valve reasonably in the side of the mounting plate, and the other side is connected by the design drawing. This kind of connection installation is simple, easy to judge and handle fault, but not compact enough to leak easily. It is commonly used for plate-type connections, and the most commonly used now is integrated connection installation. The other parts of the mounting plate and the bottom surface of the valve are not less than 1.6, and other parts 3.2 to 6.3 or higher will be fine.
The connection plate serves as a transitional function, also called the valve plate, and as for the processing of the hole, the size of the aperture and the size of the installation are calculated.
The oil road block is directly installed on the oil road block, the oil road block is drilled in the size of the valve plate, no processing sinks, and the sealing ring is installed on the valve.
