Home > categories > Electrical Equipment & Supplies > Voltage Regulators/Stabilizers > In the use and installation of the regulator, what should be noted
Question:

In the use and installation of the regulator, what should be noted

In the use and installation of the regulator, what should be noted

Answer:

While the regulator to use and install, we should note the areas in which the following by the Westinghouse simply tell your face :( a) in contact with the regulator to ensure enough space to avoid running occurs when heat case; (b) put the regulator on the power distribution panel, choose the appropriate fuse, so as to ensure safe use of electricity; (c) either regulator, in Plug in all of the input and output lines Thereafter, the switch must first close and then open, the output voltage is normal after checking to ensure that, in order to re-open; (iv) the power output of the access surface of the electrical equipment, appliances to be noted that the value and the nominal value input of the regulator are the same, absolutely can not go wrong; (e) Remember that regulators are not overloaded used; when (six) have elected to use electrical equipment air conditioning, refrigerators have the motor running, you should select more than three times the capacity of regulators , to avoid the device starts regulator current exceeds the overcurrent protection fuse or circuit breaker current causes the current regulator is a blown fuse or trip a circuit breaker, or because of pressure drop Large and unable to work; (vii) after the regulator installed, first open the switching power supply, if the indicator lights work, then we first look at the indicated value of voltmeter is normal. Output voltage is normal, and then open the power supply power switch, the regulator can automatically adjust the voltage, the normal power supply. Westinghouse electrical professional regulator manufacturers, production voltage regulator, AC voltage regulator, CNC regulator, and so the power supply, the model is complete, welcome to buy!
Second, the security matters ⒈ power supply in the power supply start, do not arbitrarily open the regulator power supply or pull the power supply input and output connections to prevent electric shock or other electrical safety accidents. ⒉ power supply input and output power supply must be arranged reasonable to prevent trampling worn, resulting in leakage accident. ⒊ power supply must be reliable grounding, due to non-ground wire operation caused by electric shock or human injury, by the user responsible for their own. ⒋ power supply can not be connected to the power line in the heating pipes, water pipes, gas pipelines and other public facilities, so as not to infringe the rights of third parties or cause harm. ⒌ should regularly check the power supply input and output connection, so as to avoid loose or fall off, thus affecting the normal use of power supply and safe power. ⒍ voltage regulator cable matching must meet the provisions of the current capacity to carry enough capacity of the cable. ⒎. Regulator should be gently, in the work of time to avoid severe vibration; ⒏, to ensure that the regulator of the carbon brush spring has enough pressure to avoid the carbon brush and coil contact surface flash; ⒐, non-professionals please do not open the regulator power supply or power supply for maintenance.

Share to: