Is the bearing seat the same as the bearing box?
The bearing should be first installed on the shaft, the bearing box cover SN220 unscrewing the bolts, remove the cover on the corresponding position of the bearing on the box, a ring to ring in place, bearing box on both sides of the hole is provided with a seal cover back and tighten the bolts, the basic process is like this. Depends on the specific operating environment.
Yes, it's one thing. They are all housings of the bearing housings, only of different shapes.
Bearing housings are not the same as bearing housings:There is only one bearing in the bearing seat, and there are many bearings in the bearing box. It is a box part supporting and lubricating the bearing.Bearing block is a kind of large and super large bearing seat which can accept the combined load and structure. It has the characteristics of compact construction, quick rotation, convenient maintenance and so on. Where there is a bearing, there must be a support point, and the internal supporting point of the bearing is the shaft, and the outer support is called the bearing seat. As a bearing can choose different bearing seat, and a bearing seat at the same time can choose different types of bearings, therefore, bring a variety of bearing seat. The bearing seat and quick and easy to have included, many foreign companies have large bearings bearing their catalog.The bearing box is a box body which supports and lubricate the bearing. Meanwhile, the axial and radial forces generated by the equipment during operation are taken into consideration. In a rotating shaft equipment, the shaft is generally supported by the rotation of bearings, bearings are installed in the bearing box, bearing box with oil, in the process of using bearings to be lubricated. At the same time, when the shaft is working, a variety of forces will also be transmitted to the bearing box, bearing by the bearing box. Bearing housings are made of cast iron and cast steel.
