Connection board width 1M long 3.7M, this should not be considered in the construction area, I saw the construction area calculation standard, GB/T 50353-2005 is not clearly defined, count or not.Which expert can help me solve this problem?. Thank you..
I know, Fujian, Quanzhou area lighting section of the connection is not the purchase of the building area inside, and air-conditioning outside the placement of the site is considered in the construction area ~!
Is it the connection between the two buildings? Or the connection between house and slope? Generally speaking, all buildings should be built in size, which is not practical.
Question: Lighting shaft connecting plate in the end is not considered construction area?Answer: according to "construction project floor area computation standard" GB/T50353-2013, added the area that has canopy daylighting well to calculate a regulation.There are 1. top lighting wells area should be calculated according to a layer structure, and the height is 2.10m and above, the whole area should be calculated; the structure height below 2.10m, the 1/2 area should be calculated.2. a light well connecting plate, if specified, is located above or above the two or two floors of the building, and serves as a space for horizontal traffic between buildings. It should be "for the overhead corridor between buildings, roof and supporting facilities, the whole area should be calculated according to the level area of the external envelope; no envelope, supporting facilities, 1/2 area should be calculated according to the structure of floor level projection area."
