Why the car hanging in the air after the drive wheel also turn (the car lifted by the lift can see the drive wheel in the turn, not the inertia reasons)
But the pressure plate and the flywheel combined with the engine in the work through the flywheel and pressure plate into the gearbox transmission is neutral but the gear inside the re-combination through the input shaft to the output shaft and then to The drive shaft to the differential to the wheel so the wheel turned
The gear oil has a high viscosity. When the gear is rotating, the gear oil is also turning and driving the wheels.
But the wheels on a little resistance, then it will not turn because it is neutral gear is different from the stall .. "There is no substantive force out ..."
