Is the self-aligning ball bearing a thrust bearing?
Self-aligning ball bearings are fixed in the form and structure of the inner and outer races, the same as those of deep groove ball bearings. The characteristics of self-aligning ball bearings (advantages) are that the bearings of the (2) bearings are automatically adjusted and adapted to different shafts.Thrust ball bearings, and shaft with the general take js6, and the shell hole with the H8. The thrust ball bearing which is contacted with the shell hole and the wall is in a stationary ring, and the radial fit clearance is larger to facilitate the automatic alignment of the raceway. In fact, H8 cooperation is to install a rough positioning."Self-aligning ball bearings are fixed in the form and structure of the inner and outer races, the same as those of deep groove ball bearings."Bearings are fixed in many ways, depending on the actual use, temperature and so on. It's not just the way the inner and outer rings need to be fixed.
Self-aligning ball bearings are fixed in the form and structure of the inner and outer races, the same as those of deep groove ball bearings. The characteristics of self-aligning ball bearings (advantages) are that the bearings of the (2) bearings are automatically adjusted and adapted to different shafts.Thrust ball bearings, and shaft with the general take js6, and the shell hole with the H8. The thrust ball bearing which is contacted with the shell hole and the wall is in a stationary ring, and the radial fit clearance is larger to facilitate the automatic alignment of the raceway. In fact, H8 cooperation is to install a rough positioning."Self-aligning ball bearings are fixed in the form and structure of the inner and outer races, the same as those of deep groove ball bearings."Bearings are fixed in many ways, depending on the actual use, temperature and so on. It's not just the way the inner and outer rings need to be fixed.
Self-aligning ball bearings are thrust bearings.The self-aligning ball bearing has a thrust self-aligning ball bearing. Its axial load capacity is very large, and it can bear a number of radial loads while it is subjected to axial load. But the radial load should not exceed 55% of the axial load. These bearings are mainly used in oil rigs, steel machinery, hydraulic generators, vertical motors, marine propeller shafts, tower cranes, extruders and so on.Thrust bearing: mainly used to bear the axial load of rolling bearings.Spherical roller bearings: axial load can bear radial load and two directions, the mind is automatically adjusted, can compensate the error caused by the concentricity and deflection, not very sensitive to the deflection of the coaxial degree and axis, but the inner and outer rings is not more than 3 degrees inclination. The radial load capacity is large, and the utility model is suitable for the case of heavy load and shock load.
