We have an established pond, and recently had to buy a new pump and skimmer. I've already bought some black plastic pipe sections and fittings . My question is, What kind of glue and cleaner can I use to attach my pipe together that will be safe for my fish? Everything I've read so far says that I should not use regular pvc glue and cleaner. Thanks
Overall I would say Football is tougher. Hockey is more of an aerobic sport w/ some wrestling in the corners and, compared to the overall game time, the occasional hard hit. Football is a constant hitting and wrestling match between some VERY large guys. The smallest football players weigh as much as the biggest Hockey players. And full speed open field hitting is the norm in Football. Not taking anything away from Hockey, it's a rough sport, (and my personal favorite), but Football is a lot rougher and more physically taxing.
Take the paper out of the printer, look down the paper slot, on the left hand side about half way down you will see a plastic arm that sticks out a bit reach in and push it with your fingers, make sure it moves up and down, on the front of the printer when you open the door and look inside on the left hand side at the bottom you will see a couple of gears, reach in and turn the gears a rotation, if it goes all the way around you know there is nothing obstructing them, when you turn the gears look inside to see if the black rubber rollers are turning, if all checks out, turn the printer off for a minute then restart the printer and try again, If you still have the problem you can try one more thing, you will need a small bottle of rubber renew, some Q tips and a paper towel folded in half, back at the paper slot when you look in you will see a rubbler D shaped pick up roller, it is usually black or grey, now dip the Q tip into the rubber renew, dab it on the paper towel then reach in and rub the pick up roller firmly, do as much of the roller as you can, check the Q tip often it will get black on you so always use another one when it's dirty and always dip the Q tip into the rubber renew, do not forget to dab it on the paper towel the rubber renew will eat the plastic on the printer, do the whole roller and turn it in the direction of the paper path, put the paper in and try again, if this does not work you should have a printer service tech look at it, the problem may not be visible and the outer case will have to be removed, I suggest you do not attempt this if you do not know where the clips are in the printer you will break them and then you will not be able to snap the case back into place again, hope this helped and good luck
The best way for you to dispose of her is for you to dispose of him!Right now (it seems) you may be in the same boat as he, liking someone that has their eyes on someone else. Help yourself by focusing your attentions on finding someone who reciprocates your affections. By doing this one of two good things can happen, 1 he'll make a wise decision and focus on you or 2, you'll get lucky and find that someone Either way you'll be rid of her.
