Home > categories > Consumer Electronics > LCD Monitors > LCD color is a bit dark
Question:

LCD color is a bit dark

Are generally normal, but a dark things display picture is a little black, for example, when playing the game when the ground is dark, the ground completely appear black (notebook display can display the ground itself). My laptop is connected to the LCD TV, using the HDMI output image

Answer:

The next drive wizard update, show drive can not, then go to the system self-contained loader, which tune inside, there are tips software, it should be display drive, hardware is the monitor, you go to customer service maintenance
This is a common problem of liquid crystal. Plasma FANS commonly used to despise the LCD, the resolution is not high enough, the sense of hierarchy is not strong.
Liquid crystal display is like this, on the one hand is the LCD display principle itself, on the other hand, with the manufacturers have a relationship, most of the LCD display is difficult to achieve high contrast. Liquid crystal itself does not emit light, it is illuminated by the backlight, and later show bright, but because of the light control of the backlight, it is difficult to achieve accurate control of the brightness of liquid crystal points. LED backlight LCD is to solve the problem of liquid crystal display possible, but the current technology and cost, can not do every crystal imaging point corresponds to a LED backlight, so cannot achieve high contrast in the true sense, the shadow detail always won't be very good.
1., check that your LCD monitor has dynamic contrast (DCR) function, and if so, set it to 'close'.2., you can search your monitor online, how to enter the factory model;3. follow the online approach into the factory mode and find the 'Auto color' or ''Auto level' 'option (usually shown as the former);4 by 3, to find a black and white picture (only black and white colors of the two picture), open, full screen, and then the factory menu cursor to 'Auto Color' through the key move, and then press OK (MENU).5. after the monitor OK, quit the factory mode to see if the problem is resolved.If item 1 is executed, you can ignore the item 2-5.
You can check if your LCD has dynamic contrast (DCR) function, and if so, set it to 'close'.This should be the display of the tuner or instability caused by power supply.Find the 'Auto color' or'Auto level'option (general display for the former); find a black and white picture (only black and white colors of the two picture), open, full screen, and then the factory menu cursor to' Auto Color 'through the key move, and then press OK (MENU). After the monitor OK, quit the factory mode to see if the problem is resolved.

Share to: