The first day when the night is very normal, the color of the morning of the second day of the boot after partial red, this situation from the beginning of April this year until now there have been a dozen times, and once a greenish, bluish, every time I have to ask the master back, how is this goingThe MSI 8500GT mute version of DVI was purchased in March this yearMy monitor is a BenQ 19 inch widescreen Gundam series last summer to buy
BenQ 94VW trash display, in addition to the appearance of good. No other advantages. Certainly your monitor internal control color chip problems. Less than a year in the warranty. You can go to repair, replacement
Display screen color is red, usually for the following reasons:1, monitor data line problem.Check whether the data line is loose and re plug the display data line. Or try to replace the new data line directly.2 、 the monitor is magnetized.Check to see if there is anything with magnetism beside the monitor.3 、 display parts aging.Display time to use for a long time, if the quality is poor, it will appear internal parts aging fast problem. This situation requires professionals to overhaul.4, video card problems.There is a video card problem, will lead to the output color signal deviation, resulting in color bias phenomenon.Open the case and check if there is a bad capacitor (such as bubbling, leakage, etc.). Conditional, you can try another video card.
The monitor should be VGA signal cable is not good due to loose contact, DVI will be pulled out and inserted again, the lock can also display itself or graphics is not stable, and will also display other hosts to distinguish between connected fault location.
You are partial color, is RGB, three primary colors occasionally less one, it is recommended to change the root line test, if not, may be the problem of the display
